Ultralit Fix Standard is a specially formulated polymer rapid repair product. In its basic low viscosity formulation, Ultralit Fix Standard may be used in a variety of unique applications to repair concrete substrates. It is designed for use in both interior and exterior concrete repair and parging situations. Can be used in patching applications: holes, divots, pop outs and re-nosing of joints. Dry aggregate needs to be mixed into Ultralit Fix Standard (“A” and “B” already mixed 1:1) or at a 3 to 1 ratio (aggregate to Ultralit Fix Standard), but not more than 4 to 1. 0,6-0,85 mm aggregate is ideal size.

Ultralit Fix Standard is packed in 2 liter kits (1 liter pail of component “A” and 1 liter pail of component “B”).

Before mixing material, thoroughly mix each side prior to combining “B” side into “‘A” side.

• Ultra low viscosity in neat configuration will penetrate concrete for permanent bond.
• Cures in 30 minutes for quick open to traffic.
• Can cure in -34°C. Cure time will be extended at lower temperatures.
• Mixed with industrial quartz sand will make a durable polymer concrete.
• May be mixed with silica flour, fumed silica, and cabosil.
• Self-leveling in thinner viscosities.
• Minimal surface preparation required.
• Good chemical resistance.
• May be bulk mixed for large area repairs.

• Repairing spalls and cracks in traffic areas
• Restoring integrity to dusted concrete
• Filing bug-holes on horizontal surfaces
• Bridge deck repairs
• Below grade repairs
• Spalled control joints
• Freezer applications
• Polished concrete floors

and others…